Hardwire PDM28

Home / Shop

Hardwire PDM28

$3,360.00
Hardwire PDM28
Hardwire PDM28
Hardwire PDM28
Hardwire PDM28
Hardwire PDM28
Hardwire PDM28
Hardwire PDM28
Hardwire PDM28
Hardwire PDM28
Hardwire PDM28
Hardwire PDM28
Hardwire PDM28
Hardwire PDM28
Hardwire PDM28

Home / Shop

Hardwire PDM28

$3,360.00
Model Number: HWPDM28
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Your Price: $3,360.00
3360.000
A one-time price of $3,360.00 will be added to your order.
1 Left in Stock
Categories: PDMs
Manufacturer: Hardwire
Facebook
Email
  • Description

PDM28

General Features

  • Size: 318x124x58mm.
  • Weight: 1640g.
  • Operating Voltage: 12/24V.
  • Operating Temperature: -55°C to 90°C (-67°F to 194°F).
  • Construction: Machined Aluminium, Media Blasted and Anodised Black.
  • IP Rating: IP67 water and dust resistant.
  • Connectors: 2x DTM 12-Pin, 2x DT 12-Pin, 1x DTP 4 Pin.
  • Quick Release Radlok Connectors.
  • Update Rate: Up to 2000Hz.
  • USB connection to a Windows PC. No external programmer is required.
  • 50x RGB LED Indicators.
  • Free and easy to use configuration software.
  • 9-Axis IMU

Inputs

  • 16 x 0-27V analogue/digital. inputs w/ frequency measurement.
  • Analogue inputs, which can also serve as digital inputs.
  • Measurement Range: Each input can measure between 0V-25V
  • Measurement Resolution: 16-Bit, or 0.001V
  • Fully protected for input voltages from -24V to 40V.
  • Integrated Software Selectable 10K Pull up/down resistors allow for positive and ground switching.
  • Inputs can be configured as Momentary or Latched, allowing for different types of switches to be used.
  • Hysteresis voltage can be added for extra resilience to voltage noise.
  • Frequency Measurement up to 300Hz with automatic triggering.
  • Software defined filters.

Outputs

  • 4x High/Low side, reverse current blocking outputs capable of supplying 30A continuous and 100A Peak
  • 6x High/Low side, reverse current blocking outputs capable of supplying 20A continuous and 80A Peak
  • 18x High/Low side outputs capable of supplying 20A continuous and 80A Peak.
  • 200A combined output maximum current
  • Protection: Each output is overcurrent, overtemperature, load dump and reverse polarity protected.
  • Output Current Control Steps: 100mA (0.1A).
  • Output Current Measurement resolution: 3mA
  • Peak fuse and High fuse thresholds can be set to allow for inrush current.
  • Trip Mode can be set to Instant (output trips immediately if the current exceeds the threshold) or Normal (acts like a normal physical fuse and allows short current spikes).
  • Outputs can be configured to stay on for a specified time after the input is removed, useful for radiator fans or water pumps.
  • Outputs can be retried multiple times after an over-current event is detected.
  • 1000Hz PWM on each output, with variable duty cycle mapping.
  • Soft start on each output for smoother turn on of devices.
  • Advanced logic functions can be made to control the output as desired.

Live Data Analysis

  • View all PDM data in real-time.
  • Data can be viewed in numerical form, or in a graphical format.
  • Detect errors and anomalies quickly and efficiently.
  • Ensure that the system is working as intended before deploying the PDM in the vehicle.

Functions

  • Each Output can be switched with a user defined logic. function, allowing for incredibly flexibility with control.
  • Logical Operators: AND, OR, NOR, XOR, NAND, NOR, >, >=, <, <=, Equal, Not Equal.
  • Global Cut Off Function can be set to turn off every output at once in an emergency.
  • Global Reset Function can be set to re-enable any tripped outputs in real-time.
  • Generic Functions can be set to allow for more complicated nesting of functions.

Data Logging

  • 128Mb of onboard flash storage for logging PDM data
  • 0.1Hz to 50Hz data logging rate.
  • Data can be downloaded and graphed via the Hardwire Electronics PDM configuration software.
  • Data can be exported as a .csv file for use in external data analysis software.
  • Log data based on a logical condition to capture specific events.

Maths Channels

  • Real Time Maths Channels can be used to convert data on-the-fly.
  • Basic Operations: Addition, Subtraction, Division, Modulus.
  • Bit-wise Operations: AND, OR, XOR, Left Shift, Right Shift.
  • Advanced Operations: Choose, Min, Max.

CAN Keypads

  • The PDM can be controlled via a range of CAN Bus keypads.
  • Rotary dials, momentary, latching and multi state buttons are supported.
  • Different colour LED button states can be configured.
  • Integrated keypad back-lighting with adjustable brightness for day/night driving.

    Supported keypads:

    Blink Marine CAN Open - 4 to 15 Button.
    Blink Marine Race Pad.
    Grayhill/Motec/Haltech CAN Open 4-20 Button.
    Marlin J1939 8 Button.

CAN Bus

  • Interface: 3x CAN2.0A/B.
  • Bus Speed: 50kbps, 100kbps, 125kbps, 250kbps, 500kbps, 1000kbps.
  • Input Stream: 100 Inputs, fully customisable variable parsing with bit masking and scaling/offsetting. A range of CAN config files are available to communicate with common ECUs.
  • DBC File importing.
  • Output Stream: 100 Outputs, fully customisable CAN. frame construction with scaling/offsetting.
  • Generic Output Stream with DBC file available.
  • NIO Expansion for more system IO.
  • Software selectable CAN termination resistors.

CAN Bus Analyser

  • Fully integrated CAN bus analyser.
  • Monitor all CAN bus traffic in real-time.
  • Log CAN bus data to a .csv file and export it for external analysis.
  • Send arbitrary CAN Bus messages onto the bus - useful for configuring CAN bus devices in your system.

LIN Bus

  • 1x LIN Bus interface
  • Import and export LDF Files
  • Control and communicate with OEM sensors and actuators.

PC App

  • Name: Hardwire Electronics PDM configurator software.
    Compatibility: Windows 10 machines
    Connectivity: Easy connection to the PDM with USB and windows integrated drivers. No unreliable USB-serial converted needed

Dimensions

System Diagram