Hardwire PDM15

Home / Shop

Hardwire PDM15

$1,720.00
Hardwire PDM15
Hardwire PDM15
Hardwire PDM15
Hardwire PDM15
Hardwire PDM15
Hardwire PDM15

Home / Shop

Hardwire PDM15

$1,720.00
Model Number: HWPDM15
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
1720.000
OUT OF STOCK until 10-14 days
Manufacturer: Hardwire
Facebook
Email
  • Description

PDM15

General Features

  • Size: 200x160x54mm
  • Weight: 615g
  • Operating Temperature: -55°C to 90°C (-67°F to 194°F)
  • Construction: Glass Fibre Reinforced Plastic
  • IP Rating: IP67
  • Connectors: Deutsch DT 12-Pin
  • Update Rate: Up to 800Hz

Inputs

  • Type: 16 Analogue inputs, which can also serve as digital inputs
  • Measurement Range: Each input can measure between 0V-6V
  • Measurement Resolution: 10-Bit, or 0.01V
  • Protection: Fully protected for input voltages from -24V to 40V 
  • Added Features: Current sourcing for ground switch detection. Configure as active high or low. Configurable Hysteresis voltage. Latching or momentary operation.

Outputs

  • Type: 15 High side outputs 80A peak, 20A continuous.
  • Combined: 180A combined output maximum current
  • Output Current Control Steps: 100mA (0.1A)
  • Protection: Each output is overcurrent, overtemperature, load dump and reverse polarity protected.
  • 5V: One 5V, 500mA output for supplying external sensors/Hardwire Electronics CAN Keypad
  • Added Features: Outputs can be configured to stay on for a specified time after the input is removed, useful for thermo-fans. Outputs can be retried multiple times after an over-current event is detected.

CAN Bus

  • Interface: 1x CAN2.0A/B
  • Bus Speed: 50kbps, 100kbps, 125kbps, 250kbps, 500kbps, 1000kbps
  • Input Stream: 40 Inputs, fully customisable variable parsing with bit masking and math functions
  • Output Stream: 40 Outputs, fully customisable CAN frame construction with math functions
  • Multiple Aftermarket CAN devices supported via CAN config files

Data Logging

  • Storage: 128Mb of onboard flash storage for logging PDM data
  • Speed: 0.1Hz to 50Hz
  • Viewing: Data can be downloaded and graphed via the Hardwire Electronics PDM configurator software

Functions

  • Output Functions: Each Output can be switched with a user defined function
  • Logical Operators: AND, OR, NOR, XOR, NAND, NOR, >, >=, <, <=, Equal, Not Equal

Bluetooth

  • Version: Bluetooth v4.0
  • App: Available in future software update

USB

  • Type: USB 2.0 Compliant Mini-B
  • Driver: Integrated driver for Windows 10

PC App

  • Compatibility: Windows 10 64-bit

Leave a Reply

Your email address will not be published. Required fields are marked *